DETAIL KOLEKSI

Perancangan pembuatan dan pengujian kotak pendingin bebasis termoelektriktipe tec1-12706 untuk aplikasi penyimpanan vaksin


Oleh : Antonius Fransisko Gonsales

Info Katalog

Penerbit : FTI - Usakti

Kota Terbit : Jakarta

Tahun Terbit : 2022

Pembimbing 1 : Rosyida Permatasari

Subyek : Refrigeration and refrigerating machinery;Thermoelectric cooling

Kata Kunci : thermoelectric, vaccine, cooling box, freon, temperature

Status Posting : Published

Status : Lengkap


File Repositori
No. Nama File Hal. Link
1. 2022_TA_STM_061001600062_Halaman-judul.pdf
2. 2022_TA_STM_061001600062_Lembar-Pengesahan.pdf
3. 2022_TA_STM_061001600062_Bab-1_Pendahuluan.pdf
4. 2022_TA_STM_061001600062_Bab-2_Tinjauan-Pustaka.pdf
5. 2022_TA_STM_061001600062_Bab-3_Metodologi-Penelitian.pdf
6. 2022_TA_STM_061001600062_Bab-4_Analisis-dan-Pembahasan.pdf
7. 2022_TA_STM_061001600062_Bab-5_Kesimpulan.pdf
8. 2022_TA_STM_061001600062_Daftrar-Pustaka.pdf
9. 2022_TA_STM_061001600062_Lampiran.pdf

D Dalam bidang kesehatan, kotak pendingin digunakan sebagai penyimpanan vaksin, obat-obatan dan darah yang menggunakan jel. Karena jel tidak dapat mengkondisikan suhu dalam waktu yang lama, maka dibuat kotak pendingin alternatif menggunakan termoelektrik sebagai media pendinginnya. Termoelektrik adalah alat yang berfungsi mengkonversi energi listrik untuk menghasilkan dingin (pendingin termoelektrik) sehingga suhu vaksin tetap stabil sesuai standarnya dan termoelektrik sangat ramah terhadap lingkungan, tidak menggunakan gas refrigran sebagai media pendinginnya. Tujuan dari peneltian ini adalah merancang, membuat dan menguji kotak pendingin untuk memindahkan vaksin dari puskesmas Boru ke posyandu Ilebura. Pada saat melakukan vaksinasi, suhu vaksin dijaga sebesar 2°C-8°C selama 4 jam (jarak pengiriman 60 km dengan kecepan rata-rata 60 km/jam untuk 1 jam pengiriman dan 3 jam untuk kegiatan vaksinasi). Perancangan ini menggunakan baterai 12 V 65 AH, kotak pendingin yang digunakan berkapasitas 5 liter (25 cm x 21 cm x 20.8 cm) (P x L x T) dan menggunakan 3 buah TEC-12706. Proses instalasi menggunakan baterai sebagai sumber listrik, kabel positif dan negatif pada termoelektrik dan kipas di dihubungkan ke saklar setelah itu kabel dari aki di sambungkan pada saklar sebagai stop kontaknya. Hasil penelitian yang didapatkan berupa kotak pendingin termoelektrik menggunakan baterai sebagai sumber listriknya yang berfungsi untuk menjaga suhu vaksin sebesar 2°C-8°C (tidak boleh beku).

I In the health sector, cooler boxes are used to store vaccines, medicines and blood using gel as the cooling medium. Because the gel cannot maintain the temperature for a long time, an alternative cooler box was made using thermoelectric as the cooling medium. Thermoelectric is a tool that functions to convert electrical energy to produce cold (thermoelectric cooler) so that the temperature of the vaccine remains stable according to the standard and thermoelectric is very friendly to the environment because it does not use refrigerant gas as a cooling medium. The purpose of this research is to design, manufacture and test cooler boxes to transfer vaccines from the Boru Health Center to the Ilebura Posyandu. At the time of vaccination, the temperature of the vaccine is maintained at 2°C-8°C for 4 hours (dispatch distance of 60 km with an average speed of 60 km/hour for 1 hour of delivery and 3 hours for vaccination activities). This design uses a 12 V 65 AH battery, the cooler used with a capacity of 5 liters (25 cm x 21 cm x 20.8 cm) (W x W x H) and uses 3 TEC-12706. The installation process uses the battery as a power source, the positive and negative wires on the thermoelectric and the fan are connected to the switch after which the cable from the battery is connected to the switch as the socket. The results obtained in the form of a thermoelectric cooler using a battery as a power source which functions to maintain the temperature of the vaccine at 2°C-8°C (not frozen).

Bagaimana Anda menilai Koleksi ini ?