Sensor split ring resonator untuk mendeteksi permitivitas cairan
Info Katalog
File Repositori
Subyek : Electrical engineering;Rotation sensors
Penerbit : FTI - Usakti
Kota Terbit : Jakarta
Tahun Terbit : 2022
Pembimbing 1 : Indra Surjati
Kata Kunci : microwave Sensor, Split Ring Resonator (SRR), accuracy, sensitivity.
Status Posting : Published
Status : Tidak Lengkap
File Repositori
| No. | Nama File | Hal. | Link |
|---|---|---|---|
| 1. | 2022_TS_MTE_162012000004_Halaman-Judul.pdf | 8 | |
| 2. | 2022_TS_MTE_162012000004_Lembar-Pengesahan.pdf | 3 | |
| 3. | 2022_TS_MTE_162012000004_Bab-1_Pendahuluan.pdf | 4 | |
| 4. | 2022_TS_MTE_162012000004_Bab-2_Tinjauan-Pustaka.pdf | 11 |
|
| 5. | 2022_TS_MTE_162012000004_Bab-3_Metodologi-Penelitian.pdf | 13 |
|
| 6. | 2022_TS_MTE_162012000004_Bab-4_Analisis-Hasil-Dan-Pembahasan.pdf | 8 |
|
| 7. | 2022_TS_MTE_162012000004_Bab-5_Kesimpulan-dan-Saran.pdf | 2 | |
| 8. | 2022_TS_MTE_162012000004_Daftar-Pustaka.pdf | 3 |
P Penelitian ini membahas sensor g split ring resonator (SRR) dengan 2 portyang dapat membedakan tiga jenis objek berdasarkan nilai permitivitasnya. Sampelyang digunakan pada penelitian ini berupa ethanol 100%, methanol 100%, dan airdestilasi. Rancangan dan simulasi SRR dilakukan melalui HFSS. Substrat yangdigunakan untuk resonator adalah RO4003 dengan konstanta dielektrik (εr) sebesar3.55, los tangen 0.0027, dan ketebalan substrat (h) sebesar 0.508 mm. Pengujianpenelitian ini dilakukan dengan meletakkan MUT diatas patch resonator yang telahditentukan dengan wadah yang telah disediakan sebanyak 1 mL. dari hasilpenelitian ini didapatkan sensor memiliki akurasi rata-rata sebesar 97.543 %,sensitivitas ternormalisasi (NS) sebesar 0.344%, dan sensitivitas (S) sebesar 9-18MHz /Δεr. pada penelitian ini didapat bahwa resonator yang dirancang dapatdijadikan sensor yang dapat mendeteksi permitivitas dan mengkarakterisasi jeniscairan antara lain: ethanol 100%, methanol 100% dan air destilasi.
T This research discusses the g split ring resonator (SRR) sensor with 2 portswhich can distinguish three types of objects based on their permittivity values. Sampleused in this research were 100% ethanol, 100% methanol, and waterdistillation. SRR design and simulation is carried out via HFSS. The substrateused for the resonator is RO4003 with a dielectric constant (εr) of3.55, loss tangent 0.0027, and substrate thickness (h) of 0.508 mm. TestingThis research was carried out by placing MUT on top of an existing resonator patchdetermined using the provided container of 1 mL. from the resultsThis research found that the sensor had an average accuracy of 97.543%,normalized sensitivity (NS) was 0.344%, and sensitivity (S) was 9-18MHz /Δεr. In this research it was found that the designed resonator couldused as a sensor that can detect permittivity and characterize the typeliquids include: 100% ethanol, 100% methanol and distilled water.