M otor control center (MCC) is the center for controlling the operation of electric motors. A control center must be able to control the operation of the motor simultaneously. In making MCC in this final project, there are several starters, namely variable speed drives (VSD) and using star-delta starters. All of these starters are contained in an integrated panel. The function of this MCC is to regulate the cold air supply of the Air Handling Unit in the RCTI+ Studio, AHU is used for cold air conditioning in the room which can contribute to the television broadcast production process, especially in the dry ice fog machine as a tool for blowing cloud effects on the stage. This system has two modes, namely VSD and star-delta modes which drive the Air Handling Unit motor as a tool to exhale air. The VSD mode has the main component, namely the Variable speed drive, some variable frequency settings from 1-50 Hz for high-speed and low-speed modes. On the VSD display it can be seen how much the AHU motor rpm is which will later be compared with the tachometer measurement results. For the star-delta system, the operation is only by pressing the push button on the panel. This system is regulated by time on delay for switching from star mode to delta mode. The star – delta system serves to reduce the amount of high starting current which is useful for extending the life (life time) of electric motor equipment. With the two systems above, the design of a motor control center system is made using a variable speed drive for setting the supply air handling unit in Studio RCTI+.