DETAIL KOLEKSI

Pengaruh penggunaan elektroda silindrik berlapis tiga dan jatropha curcas sebagai fluida dielektriknya terhadap pemotongan baja SKD 61 dengan proses EDM


Oleh : Moucza Al Qununi

Info Katalog

Penerbit : FTI - Usakti

Kota Terbit : Jakarta

Tahun Terbit : 2014

Pembimbing 1 : Triyono

Subyek : Metal - Cutting

Kata Kunci : plated three cylindrical electrodes, jatropha curcas, the dielectric fluid, cutting steel SKD 61, th

Status Posting : Published

Status : Lengkap


File Repositori
No. Nama File Hal. Link
1. 2014_TA_MS_06111067_Halaman-Judul.pdf
2. 2014_TA_MS_06111067_Bab-1.pdf
3. 2014_TA_MS_06111067_Bab-2.pdf
4. 2014_TA_MS_06111067_Bab-3.pdf
5. 2014_TA_MS_06111067_Bab-4.pdf
6. 2014_TA_MS_06111067_Bab-5.pdf
7. 2014_TA_MS_06111067_Lampiran.pdf

P Pengaruh penggunaan elektroda silindrik multi-lapisan dan fluida dielektrik Jatropha Curcas terhadap kekasaran permukaan pada material baja SKD 61 dan penggunaan minyak jarak pada mesin EDM SKM NC¬EDM K50, untuk itu dilakukan eksperimen pemotongan dengan elektroda silindrik tiga lapis \"tembaga — grafit tembaga\" yang dikombinasi dengan fluida dielektrik jatropha curcas hasil transesterifikasi. Ada 6 speciment yang diuji dengan kondisi pemotongan optimum untuk elektroda dengan arus listrik sebagai variabel parameter proses enam tingkat 3, 4.5, 6, 9, 12, dan 15 Ampere. Replikasi pemotongan tiga kali pada setiap speciment. Dari analisis data disimpulkan arus listrik berpengaruh terhadap kekasaran permukaan, pada daerah yang diteliti semakin tinggi arus listrik kekasaran permukaan semakin rendah (kasar), Elektroda berlapis menghasilkan kekasaran permukaan yang Iebih rendah (kasar) (5,57pm s/d 14,75 pm) dan minyak jarak (jatropha curcas) selain bisa digunakan pada mesin EDM MAHO HENSEN bisa juga digunakan pada mesin EDM SKM NC-EDM K50 sebagai cairan dielektriknya

T The influence of the use of multi-layer cylindrical electrode and dielectric fluid to the surface roughness of Jatropha Curcas on SKD 61 steel material and the use of castor oil on the EDM machine NC-EDM SKM K50, for cutting experiment was done with three layers of cylindrical electrodes \"copper - graphite - copper\" combined with dielectric fluid transesterification of jatropha curcas results. There are 6 speciment tested with the optimum cutting conditions for the electrode with an electric current as a six-level variable process parameters 3, 4.5, 6, 9, 12, and 15 Amperes. Replication cuts three times on each speciment. From the analysis of the data concluded electrical currents affect the surface roughness, the higher the area studied electrical current the lower the surface roughness (rough), plated electrode produces a lower surface roughness (rough) (5,57pm to 14,75 pm) and casor oil (Jatropha curcas) in addition can be used in the EDM machine MAHO Hensen could also be used in the EDM machine NC-EDM SKM K50 as a dielectric fluid

Bagaimana Anda menilai Koleksi ini ?