DETAIL KOLEKSI

Analisis perbandingan metode perhitungan survei lintasan pemboran berarah disumur HNS

2.0


Oleh : Nival Horman Sumanto

Info Katalog

Nomor Panggil : 1067/TP/2019

Penerbit : FTKE - Usakti

Kota Terbit : Jakarta

Tahun Terbit : 2019

Pembimbing 1 : Lilik Zabidi

Pembimbing 2 : Apriandi Rizkina

Subyek : Oil well drilling

Kata Kunci : drilling trajectory, minimum of curvature, directional drilling.

Status Posting : Published

Status : Lengkap


File Repositori
No. Nama File Hal. Link
1. 2019_TA_TM_071001400122_Halaman-Judul.pdf
2. 2019_TA_TM_071001400122_BAB-1.pdf
3. 2019_TA_TM_071001400122_BAB-2.pdf
4. 2019_TA_TM_071001400122_BAB-3.pdf
5. 2019_TA_TM_071001400122_BAB-4.pdf
6. 2019_TA_TM_071001400122_BAB-5.pdf
7. 2019_TA_TM_071001400122_Daftar-Pustaka.pdf
8. 2019_TA_TM_071001400122_Lampiran.pdf

P Pemboran berarah adalah proses mengarahkan suatu lintasan pemboran sepanjang beberapa lintasan ke target yang telah ditentukan. Kontrol deviasi adalah proses menjaga sumur bor yang terkandung dalam beberapa batas yang ditentukan relatif terhadap sudut kemiringan, perjalanan horizontal dan vertikal, atau keduanya. Pemboran vertikal, meskipun dianggap mendasar adalah sebagian besar wilayah, bisa sulit dicapai pada beberapa daerah karena formasi miring berangsur-angsur.Pemboran directional biasanya telah dilakukan untuk memecahkan masalah geologi, geografis, dan ekonomi. Faktor yang digunakan untuk merencanakan arah lintasan pemboran adalah koordinat lokasi permukaan, titik tumpu, koordinat lokasi permukaan dan build-up rate.Sumur NHS dibor menggunakan metode pemboran directional dengan tipe keduanya adalah tipe miring atau tipe “J”. Survei lintasan mengambil oleh MWD dan perhitungan survei dengan metode yang berbeda. Metode yang digunakan adalah metode Tangential, metode Radius of Curvature, dan metode Minimum of Curvature. Dalam tugas akhir, penulis akan menganalisis arah lintasan pemboran antara metode yang digunakan dengan data aktual pemboran.

D Directional Drilling is the process of directing the well-bore along some trajectory to a predetermined target. Deviation control is the process of keeping the well-bore contained within some prescribed limits relative to inclination angle, horizontal excursion from vertical, or both. Vertical drilling, althought considered fundamental is most areas, can be difficult to achieve in some regions due to steply dipping formations.Directional Drilling usually been doing to solved the geology, geographic, and economic problems. Factor that being used to make the trajectory are surface location coordinate, kick of point, surface location coordinate and build up rate.NHS Well drilled using directional drilling method with the both type is slant type or “J” type. The trajectory survey took by MWD and the calculations of the survey with a diffrent method. The method are Tangetial method, Radius of Curvature, and Minimum of Curvature. In the final assignment, the writer would anylized and directional drilling trajectory between some method and actual drilling data.

Bagaimana Anda menilai Koleksi ini ?