DETAIL KOLEKSI

Pengaruh penambhan Cu terhadap nilai keras AI

5.0


Oleh : Muhammad Fatahillah Kawakibi Shodiqi

Info Katalog

Penerbit : FTI - Usakti

Kota Terbit : Jakarta

Tahun Terbit : 2015

Pembimbing 1 : Dody Prayitno

Pembimbing 2 : Christina Eni Pujiastuti

Subyek : Cu value - mechanical engineering;Metallurgy;Porocity

Kata Kunci : accordance AI, Cu, hardness value, porocity,

Status Posting : Published

Status : Lengkap


File Repositori
No. Nama File Hal. Link
1. 2015_TA_MS_06111007_Halaman-Judul.pdf 16
2. 2015_TA_MS_06111007_Bab-1.pdf 4
3. 2015_TA_MS_06111007_Bab-2.pdf
4. 2015_TA_MS_06111007_Bab-3.pdf
5. 2015_TA_MS_06111007_Bab-4.pdf
6. 2015_TA_MS_06111007_Bab-5.pdf
7. 2015_TA_MS_06111007_Daftar-Pustaka.pdf 1
8. 2015_TA_MS_06111007_Lampiran.pdf

T Tugas Akhir ini bertujuan untuk mengetahui pengaruh penambahan tembaga terhadap nilai keras Aliminium. Varian Tembaga adalah 10%, 15%, 32%, dan 53%. Metodologi. Al dan Cu ditimbang sesuai kadarnya masing-masing kemudian di remelting. Cairan paduan kemudian dicetak pada cetakan pasir. Sampel lalu diuji keras Rockwell dan Metalografi. Hasil penelitian. Sampel paduan Al-10%Cu dan Al-35%Cu tidak dapat digunakan karena hancur. Nilai keras Rockwell pada penelitian Al-15%Cu dan Al-53%Cu berturut-turut adalah 67,4 kg/mm2, 55,3 kg/mm2. Porositas Al-10%Cu dan AI-35%Cu berturut-turut 4,4% dan 6,8%. Nilai keras pada produk (As Cast) dengan nilai porositas yang semakin besar menurunkan nilai keras Al. Kesimpulan. Penambahan kadar Cu dari 15% hingga 53% menurunkan nilai keras Aluminium.

T This Thesis discusses about the effect of adding Cu and the porosity to hardness of Al. In this study, the addition of Cu was conducted with variation 10%, 15%, 32%, and 53%. Al-10%Cu and Al-35%Cu cannot be measured due to both of these product (As Cast) was broken. The values of Rockwell hardness for Al-10%Cu and Al-35%Cu was observed in a row 67,4 kg/mm2, 55,3 kg/mm2. In this study, percentage of porosity was observed in a row 4,4% and 6,8%. Based on the results, hardness value of sample with greater porosity decreases the hardness of Al, in accordance with the literature review that greater the porosity, hardness value will decrease.

Bagaimana Anda menilai Koleksi ini ?