T The use of solar panels today as a source of renewable energy. The solar panels capable of generating electricity from solar light energy. Many countries implement renewable energy to replace power plants that still use BBM. The continued development of the solar panels a lot of brands are offered with a variety of price and quality and Country maker. It becomes a question of the efficiency of solar panels in mass production. At this thesis, will examine peformansi three solar panels in the ability to absorb the intensity of sunlight to generate electrical power. The solar panels were tested, namely Solarland, Suntex, and Sunnybee. parameters used for this test is the position of the solar panels are in place the statically with a slope of 200 solar panels facing north and follow the direction of the tilt angle of the sun with solar panels on the revamped 150 every hour. In the tests will be short-circuit current (Isc), open circuit voltage (Voc), the input power (Pin), power output (Pout) and the efficiency of each solar panel. From the test results, solar panels 2 or Suntex produces the highest power in the test position and the position of static solar panels to follow the sun's movement direction. When a static position efficiencies gained by 5.38% and the current position following the movement of the sun efficiencies gained by 9.15% to the intensity of the sun cayaha of 865 W / m2 when static test conditions and 768 W / m2 when test conditions follow the movement direction sun.