DETAIL KOLEKSI

Analisis temperatur limit reservoir berdasarkan ekstraksi massa dan energi dengan pendekatansistem tertutup lapangan panas bumi IR


Oleh : Ireane Yunita

Info Katalog

Nomor Panggil : 632/TP/2017

Penerbit : FTKE - Usakti

Kota Terbit : Jakarta

Tahun Terbit : 2017

Pembimbing 1 : Sugiatmo Kasmungin

Pembimbing 2 : Bamabang Sutarso

Subyek : Geothermal;Reservoir

Kata Kunci : geothermal, determine temperature, power plant.

Status Posting : Published

Status : Lengkap


File Repositori
No. Nama File Hal. Link
1. 2017_TA_TM_071001300098_Halaman-judul.pdf
2. 2017_TA_TM_071001300098_Bab-1.pdf
3. 2017_TA_TM_071001300098_Bab-2.pdf
4. 2017_TA_TM_071001300098_Bab-3.pdf
5. 2017_TA_TM_071001300098_Bab-4.pdf
6. 2017_TA_TM_071001300098_Bab-5.pdf
7. 2017_TA_TM_071001300098_Daftar-pustaka.pdf
8. 2017_TA_TM_071001300098_Daftar-simbol.pdf
9. 2017_TA_TM_071001300098_Lampiran.pdf

P Panas bumi merupakan salah satu energi terbarukan (re-newable energy) yang sangat dipengaruhi oleh temperatur. Oleh sebab itu temperatur dari reservoir panas bumi merupakan parameter utama perlu ditentukan. Dalam tugas akhir ini penulis melakukan analisis terhadap temperatur berupa penentuan temperatur limit atau temperatur akhir terdapatnya massa di dalam reservoir panas bumi untuk suatu Pembangkit Listrik Tenaga Panas Bumi (PLTP).Dalam perhitungan temperatur limit ini, diawali dengan perhitungan potensi sumber energi panas dari reservoir panas bumi. Parameter yang digunakan untuk menghitung nilai energi panas dan nilai temperatur limit yaitu luas, tebal, porositas, densitas fluida, saturasi fluida, densitas batuan, konduktivitas panas batuan, temperatur awal, tekanan, dan entalpi fluida. Parameter-parameter reservoir tersebut akan diuji kesensitivitasannya terhadap temperatur limit. Selanjutnya dilakukan analisa skenario produksi untuk menentukan jumlah sumur yang akan diproduksikan dan pemilihan kapasitas PLTP.Dari tugas akhir ini didapat nilai massa awal reservoir sebesar 4,965 x 1011 kg, dengan energi awal sebesar 2,710 x 1016 kJ. Dari nilai massa awal tersebut, didapatkan nilai temperatur limit sebesar 213,58 áµ’C. Pada analisa skenario produksi dipilih skenario ketiga karena potensi listrik yang dihasilkan mendekati potensi listrik yang dimiliki oleh lapangan sehingga eksploitasi energi panas bumi mendekati optimal, dan pemilihan kapasitas PLTP yang dipilih sebesar 40 MW.

G Geothermal energy is one of the renewable energy which is influenced by temperature. Therefore, the temperature of reservoir is the parameter needs to be determined. In this final assignment, the writer did an analysis on temperature, to be precise, the temperature limit or final temperature of the avaibility of mass in reservoir for a geothermal power plant.In the calculation of this temperature abandon, started with the calculation of initial reserve of geothermal. Parameters that’s been used to calculate the value of initial reserve and temperature limit is area, thickness, porosity, fluid density, fluid saturation, rock density, thermal rock conductivity, initial temperature, pressure, and fluids enthalpy. There’s also a sensitivity test for these reservoir parameters to know the value of sensitivity reservoir’s parameter toward the value of temperature limit. After that, the author do an analysis of production scenario to determine the number of wells that need to be produced and choosing the geothermal power plant capacity.This final assignment result is the initial mass of reservoir is 4,965 x 1011 kg, with initial energy 2,710 x 1016 kJ. From the initial mass can determine temperature abandon is 213,58 ᵒC. After that, the result from production scenario analysis is the third scenario because potential electrical resulting from this scenario approaching field potential, and geothermal power plant capacity as big as 40 MW is chosen.

Bagaimana Anda menilai Koleksi ini ?