Pengaruh penambhan Cu terhadap nilai keras AI
Penerbit : FTI - Usakti
Kota Terbit : Jakarta
Tahun Terbit : 2015
Pembimbing 1 : Dody Prayitno
Pembimbing 2 : Christina Eni Pujiastuti
Subyek : Cu value - mechanical engineering;Metallurgy;Porocity
Kata Kunci : accordance AI, Cu, hardness value, porocity,
Status Posting : Published
Status : Lengkap
No. | Nama File | Hal. | Link |
---|---|---|---|
1. | 2015_TA_MS_06111007_Halaman-Judul.pdf | 16 | |
2. | 2015_TA_MS_06111007_Bab-1.pdf | 4 | |
3. | 2015_TA_MS_06111007_Bab-2.pdf |
|
|
4. | 2015_TA_MS_06111007_Bab-3.pdf |
|
|
5. | 2015_TA_MS_06111007_Bab-4.pdf |
|
|
6. | 2015_TA_MS_06111007_Bab-5.pdf |
|
|
7. | 2015_TA_MS_06111007_Daftar-Pustaka.pdf | 1 | |
8. | 2015_TA_MS_06111007_Lampiran.pdf |
|
T Tugas Akhir ini bertujuan untuk mengetahui pengaruh penambahan tembaga terhadap nilai keras Aliminium. Varian Tembaga adalah 10%, 15%, 32%, dan 53%. Metodologi. Al dan Cu ditimbang sesuai kadarnya masing-masing kemudian di remelting. Cairan paduan kemudian dicetak pada cetakan pasir. Sampel lalu diuji keras Rockwell dan Metalografi. Hasil penelitian. Sampel paduan Al-10%Cu dan Al-35%Cu tidak dapat digunakan karena hancur. Nilai keras Rockwell pada penelitian Al-15%Cu dan Al-53%Cu berturut-turut adalah 67,4 kg/mm2, 55,3 kg/mm2. Porositas Al-10%Cu dan AI-35%Cu berturut-turut 4,4% dan 6,8%. Nilai keras pada produk (As Cast) dengan nilai porositas yang semakin besar menurunkan nilai keras Al. Kesimpulan. Penambahan kadar Cu dari 15% hingga 53% menurunkan nilai keras Aluminium.
T This Thesis discusses about the effect of adding Cu and the porosity to hardness of Al. In this study, the addition of Cu was conducted with variation 10%, 15%, 32%, and 53%. Al-10%Cu and Al-35%Cu cannot be measured due to both of these product (As Cast) was broken. The values of Rockwell hardness for Al-10%Cu and Al-35%Cu was observed in a row 67,4 kg/mm2, 55,3 kg/mm2. In this study, percentage of porosity was observed in a row 4,4% and 6,8%. Based on the results, hardness value of sample with greater porosity decreases the hardness of Al, in accordance with the literature review that greater the porosity, hardness value will decrease.