DETAIL KOLEKSI

Analisis pressure build up test dan deliverability test pada reservoir gas


Oleh : Ichlasul Ammal

Info Katalog

Nomor Panggil : 1334/TP/2021

Penerbit : FTKE - Usakti

Kota Terbit : Jakarta

Tahun Terbit : 2021

Pembimbing 1 : Rini Setiati

Pembimbing 2 : Arinda Riswati

Subyek : Hydrocarbon reservoirs

Kata Kunci : well testing, pressure build up test, metode Horner, deliverability test, skin, permeabilitas

Status Posting : Published

Status : Lengkap


File Repositori
No. Nama File Hal. Link
1. 2021_TA_STP_071001600056_Halaman-Judul.pdf
2. 2021_TA_STP_071001600056_Pengesahan.pdf
3. 2021_TA_STP_0710001600056_Bab-1_Pendahuluan.pdf
4. 2021_TA_STP_0710001600056_Bab-2_Tinjauan-Pustaka.pdf
5. 2021_TA_STP_0710001600056_Bab-3_Metodologi.pdf
6. 2021_TA_STP_0710001600056_Bab-4_Perhitungan.pdf
7. 2021_TA_STP_0710001600056_Bab-5_Pembahasan.pdf
8. 2021_TA_STP_0710001600056_Bab-6_Kesimpulan.pdf
9. 2021_TA_STP_0710001600056_Daftar-pustaka.pdf
10. 2021_TA_STP_0710001600056_Lampiran.pdf

P Pada analisis reservoir gas ini dilakukan Analisis Pressure Build Up Test,Deliverability Test dan Modified Isochronal Test. Dalam melakukan analisis in iadalah dengan cara menggunakan metode manual dengan Microsoft Excel yaitu dengan metode Horner dan metode Pseudopressure ψ(P), dan menggunakan metode Software dengan menggunakan Software .Pada analisis reservoir gas ini dengan analisis Pressure Build Up Test,dengan maksud agar mengetahui parameter seperti permeabilitas (k), skin (s) dandapat mengetahui Well Model, Reservoir Model, dan Boundary Model pada sumurini dengan menggunakan Software , dan untuk Deliverability Test agar mengetahuiAbsolute Open Flow Potential (AOFP).Analisis dengan menggunakan metode manual dengan menggunakanMicrosoft Excel dengan menggunakan metode Horner dan Deliverability Test danPseudopressure ψ(P). Hasil yang didapatkan adalah 16.048 mD, untuk nilai daripermeabilitas (k), sedangkan untuk nilai dari skin (s) didapatkan -1.812, sedangkanuntuk nilai dari tekanan awal reservoir adalah 2970 psia, sedangkan untuk nilai dariC adalah 0.0017 (mscf/D)/(psi2/cp)n, sedangkan untuk nilai dari n adalah 1.241,sedangkan untuk nilai dari Absolute Open Flow Potential (AOFP) adalah 7.19x105Mscf/D, sedangkan untuk perhitungan dengan menggunakan Software . Hasil yangdidapatkan adalah 18.7 mD, untuk nilai dari permeabilitas (k), sedangkan untuknilai dari tekanan awal reservoir adalah 2961.84 psia, sedangkan untuk nilai dari Cadalah 0.0513 (mscf/D)/(psi2/cp)n, sedangkan untuk nilai dari n adalah 1.4143,sedangkan untuk nilai dari Absolute Open Flow Potential (AOFP) adalah 6.77x105Mscf/D. Hasil analisis menggunakan Software untuk menentukan model darisumur ini adalah Vertical dengan model reservoir Homogeneous dan modelboundary Intersecting Fault - Pi/N, dengan adanya nilai L sebesar 70.9 ft.

. .In this gas reservoir analysis, Pressure Build Up Test, Deliverability Testand Modified Isochronal Test are performed. In doing this analysis is by using themanual method with Microsoft Excel, namely the Horner method and thePseudopressure method ψ (P), and using the Software method using the Software.In this gas reservoir analysis with Pressure Build Up Test analysis, with theintention of knowing parameters such as permeability (k), skin (s) and being ableto know the Well Model, Reservoir Model, and Boundary Model in this well usingSoftware, and for Deliverability Test to find out the Absolute Open Flow Potential(AOFP).Analysis using manual methods using Microsoft Excel using the Hornermethod and the Deliverability Test and Pseudopressure ψ (P). The result obtainedis 16.048 mD, for the value of permeability (k), while the value of skin (s) is -1.812,while the value of the initial reservoir pressure is 2970 psia, while for the value ofC is 0.0017 (mscf/D)/(psi2/cp)n, while the value of n is 1.241, while the value ofAOFP is 7.19x105 Mscf / D, while for calculations using Software. The resultobtained is 16.6 mD, for the value of permeability (k), while the value of the initialreservoir pressure is 2961.84 psia, while for the value of C is 0.0513(mscf/D)/(psi2/cp)n, while for the value of n is 1.4143, while the value of AbsoluteOpen Flow Potential (AOFP) is 6.77x105 Mscf / D. The results of the analysis usingSoftware to determine the model of this well are Vertical with the Homogeneousreservoir model and the Intersecting Fault - Pi/N boundary model, with the L valuesof 70.9 ft, respectively.

Bagaimana Anda menilai Koleksi ini ?