D During drilling operation in Well X on Field Y, there were many problems occurred. Those problems hampered the smooth operation of drilling in that well. One of drilling problems occurred seriously during the operation was the stuck of the series of drilling pipe. This pipe stuck event clearly extend the drilling operation s time and cost compared to the planned one. In this final task assigned to me to conclude my study period, it will be examined on the cause of stuck on the drill pipe, and its handling actions which have been done. In addition to that, the things that can cause a pipe stuck, such as aspects of hydraulics, mud, borehole stability, and including formations types and lithology of rock. Also discussed the types of pipe stuck such as differential sticking, mechanical, key seat, pack-off. As well as, the methods should be performed in handling the stuck of drilling pipe such as work on pipe, circulation, immersion, and the last method back-off. Evaluations were made on this final task is related to the mud used along with its rheology, and drilling hydraulics This is performed, so that the drilling operation can be continued, and the completion work of the well can be accomplished successfuly. Stuck pipe in the well trajectory X occurred at 26 trajectory with cumulative of cutting classification were caused by the application of unsuitable drilling mud, rheology was not optimally implemented, as well as the pump deployed from the aspects of hydraulics. The method performed to handle the stuck pipe in the well of X was back-off method, due to the implementation ofother methods such as work on pipe, circulation, and immersion did not successfully release the pipe. Drilling then continued with a side track to achieve the displacement target as planned.