DETAIL KOLEKSI

Evaluasi Progressive Cavity Pump Untuk Meningkatkan Laju Alir Produksi Pada Sumur EK-01 Lapangan N


Oleh : Eveline Paulina Plera Kedang

Info Katalog

Penerbit : FTKE - Usakti

Kota Terbit : Jakarta

Tahun Terbit : 2023

Pembimbing 1 : Sigit Rahmawan

Pembimbing 2 : Djunaedi Agus Wibowo

Subyek : Drilling mud

Kata Kunci : Progressive cavity pump (PCP), Total Dynamic Head (TDH), Rotating Per Minute (RPM), Horse Power (HP)

Status Posting : Published

Status : Lengkap


File Repositori
No. Nama File Hal. Link
1. 2023_SK_STP_071001900029_Halaman-Judul.pdf 11
2. 2023_SK_STP_071001900029_Surat-Pernyataan-Revisi-Terakhir.pdf 1
3. 2023_SK_STP_071001900029_Surat-Hasil-Similaritas.pdf 1
4. 2023_SK_STP_071001900029_Halaman-Pernyataan-Persetujuan-Publikasi-Tugas-Akhir-untuk-Kepentingan-Akademis.pdf 1
5. 2023_SK_STP_071001900029_Lembar-Pengesahan.pdf 1
6. 2023_SK_STP_071001900029_Pernyataan-Orisinalitas.pdf 1
7. 2023_SK_STP_071001900029_Formulir-Persetujuan-Publikasi-Karya-Ilmiah.pdf 1
8. 2023_SK_STP_071001900029_Bab-1.pdf
9. 2023_SK_STP_071001900029_Bab-2.pdf
10. 2023_SK_STP_071001900029_Bab-3.pdf 5
11. 2023_SK_STP_071001900029_Bab-4.pdf
12. 2023_SK_STP_071001900029_Bab-5.pdf
13. 2023_SK_STP_071001900029_Daftar-Pustaka.pdf
14. 2023_SK_STP_071001900029_Lampiran.pdf

P Progressive Cavity Pump (PCP) merupakan salah satu jenis artificial lift yang digunakan pada sumur EK-01 Lapangan N. Penggunaan PCP pada sumur EK-01 dikarena kemampuan tekanan reservoir dari sumur EK-01 yang sudah berkurang dan tidak mampu mengangkat fluida ke permukaan. Tipe pompa yang digunakan pada sumur EK-01 adalah moyno 40-N-095 dengan kapasitas fluida yang bisa diangkat oleh pompa sebesar 98,9 bfpd per 100 RPM. Kedalaman maksimal yang mampu dijangkau oleh progressive cavity pump tipe 40-N-095 adalah 4000 ft. Kondisi sumur sekarang mampu memproduksikan fluida sebesar 61,12 Bfpd dengan kecepatan pompa 160 RPM dan memiliki water cut sebesar 73%. Ketika dilakukan evaluasi diperoleh nilai efisiensi volumetrik pompa sebesar 38,66%, nilai HP sebesar 3,9 dengan kapasitas maksimal fluida yang dapat diproduksikan sebesar 199,11 bfpd. Berdasarakan nilai efisiensi pompa bisa dibilang cukup rendah karena nilai efisiensi pompa sendiri dikatakan baik jika berkitar antara 50%-75% dan juga nilai laju alir produksi fluida saat ini hanya mencapai 61,12 dengan kecepatan putar 160 RPM sangat kurang efektif berdasarkan dengan kapasitas fluida yang mampu diangkat oleh pompa. Sehingga perlu dilakukan optimasi terhadap pompa progressive cavity pump yang terpasang pada sumur EK-01 Lapangan N agar bisa menaikan laju alir produksi dengan merubah beberapa parameter yang diperlukan. Optimasi yang dilakukan pada sumur EK-01 Lapangan N dengan menentukan pump setting depth, total dynamic head, penentuan RPM dan Hp dari pompa terpasang berdasarkan laju alir target yang ditentukan dari maksimal fluida yang mampu diproduksikan oleh sumur EK-01. Optimasi yang pertama dilakukan adalah perubahan pump setting depth dari 1968,5 ft menjadi 2018,8 ft kemudian dilakukan perbaikan efisiensi head terhadap pompa terpasang berdasarkan dua laju alir target yaitu 119,47 Bfpd dan 129,42 Bfpd. Yang paling optimal yaitu laju alir 119,47 BFPD dengan efisiensi head 65% diperolehlah nilai TDH yang optimum 1129,19 ft dengan kecepatan putar pompa 186,02 dan horse power 2,7.

P Progressive Cavity Pump (PCP) is a type of artificial lift that is used in well EK-01 Field N. The use of PCP in well EK-01 is due to the ability of reservoir pressure from well EK-01 which has been reduced and unable to lift fluid to the surface. The type of pump used in the EK-01 well is moyno 40-N-095 with a fluid capacity that can be lifted by the pump of 98.9 bfpd per 100 RPM. The maximum depth that can be reached by the type 40-N-095 progressive cavity pump is 4000 ft. The current condition of the well is capable of producing 61.12 Bfpd of fluid with a pump speed of 160 RPM and has a water cut of 73%. When the evaluation was carried out, the volumetric efficiency value of the pump was 38.66%, the HP value was 3.9 with a maximum fluid capacity that could be produced of 199.11 bfpd. Based on the pump efficiency value, it can be said to be quite low because the pump efficiency value itself is said to be good if it is around 50% -75% and also the current flow rate of fluid production only reaches 61.12 with a rotational speed of 160 RPM which is very less effective based on the fluid capacity that can be lifted by the pump. So it is necessary to optimize the progressive cavity pump installed in the EK-01 well Field N so that it can increase the production flow rate by changing some of the necessary parameters. The optimization was carried out on the EK-01 well Field N by determining the pump setting depth, total dynamic head, determining the RPM and Hp of the installed pump based on the target flow rate determined from the maximum fluid that the EK-01 well can produce. The first optimization carried out was changing the pump setting depth from 1968.5 ft to 2018.8 ft and then improving the head efficiency of the installed pump based on two target flow rates, namely 119.47 Bfpd and 129.42 Bfpd. The most optimal flow rate is 119.47 BFPD with a head efficiency of 65%, the optimum TDH value is 1129.19 ft with a pump rotational speed of 186.02 and horse power of 2.7.

Bagaimana Anda menilai Koleksi ini ?