DETAIL KOLEKSI

Evaluasi penanggulangan hilangnya sirkulasi lumpur pada sumur CLU-14 lapangan CLU-D/6


Oleh : Alfredo Meirexa

Info Katalog

Nomor Panggil : 1347/TP/2021

Penerbit : FTKE - Usakti

Kota Terbit : Jakarta

Tahun Terbit : 2021

Pembimbing 1 : Ir. Abdul Hamid, M.T

Pembimbing 2 : Ghanima Yasmaniar S.T., M.T

Subyek : Oil well drilling - Lost circulation

Kata Kunci : loss circulation, drilling mud, lcm, blind drilling

Status Posting : Published

Status : Lengkap


File Repositori
No. Nama File Hal. Link
1. 2021_TA_STP_071001300012_Halaman-judul.pdf
2. 2021_TA_STP_071001300012_Pengesahan.pdf
3. 2021_TA_STP_071001300012_Bab-1_Pendahuluan.pdf
4. 2021_TA_STP_071001300012_Bab-2_Tinjauan-literatur.pdf
5. 2021_TA_STP_071001300012_Bab-3_Kerangka-konsep.pdf
6. 2021_TA_STP_071001300012_Bab-4_Metode.pdf
7. 2021_TA_STP_071001300012_Bab-5_Kesimpulan.pdf
8. 2021_TA_STP_071001300012_Daftar-pustaka.pdf
9. 2021_TA_STP_071001300012_Lampiran.pdf

H Hilangnya Sirkulasi lumpur pemboran ialah hilangnya semua atau sebagianlumpur dalah sirkulasinya dan masuk kedalam formasi. Lost Circulationmerupakan salah satu dari banyak tipe masalah yang dihadapi dalam prosespemboran. Oleh karena itu perlu adanya perancanaan pemakaian lumpur pemboranyang baik dan benar agar pemboran dapat berjalan dengan lancar. Masalah-masalahyang sering terjadi pada operasi pemboran, antara lain: pipas terjepit akibatpengembangan lapisan shale, pack off, lost circulation dan lain-lainya.Pemboran sumur CLU-14 adalah sumur vertikal yang berada padalapangan CLU-D/6. Pada sumur CLU-14 terjadi permasalahan hilangnya sirkulasilumpur pada kedalaman 3185 ft. sumur CLU-14 mengalami total loss, sehinggatidak ada lumpur yang kembali ke permukaan. Berdasarkan perhitungan yangdilakukan pada kedalaman 3185 ft diperoleh nilai tekanan hidrostatik sebesar4357,3 psi, nilai tekanan fracture 4358,62 psi, nilai tekanan formasi 2141,61 psidan Equivalent Circulation Density (ECD) sebesar 8,807 ppg, dan Bottom HoleCirculation Pressure atau BHCP sebesar 4156,028 psi. Penyebab terjadinya hilanglumpur adalah natural fracture. Metode penanggulangan yang dilakukan padasumur CLU-14 adalah LCM dan blind drilling. Metode dengan menggunakan LCMtidak berhasil menutup zona loss, sehingga dilakukan metode Blind drilling. Blinddrilling dilakukan untuk menjaga stabilitas lubang dengan cara menjaga tekananhidrostatik. Metode ini berhasil hingga total depth. Sehingga menghentikan lajudari hilangnya sirkulasi lumpur pemboran.

L Loss of circulation drilling mud is the loss of all or part of the mud in itscirculation and enters the formation. Lost Circulation is one of the many types ofproblems faced in the drilling process. Therefore it is necessary to have a good andcorrect planning of drilling mud expansion so that the drilling can run smoothly.Problems that often occur in drilling operations include: pinched pipelines due tothe development of the shale layer, pack off, lost circulation and others.The CLU-14 well drilling is a vertical well located in the CLU-D / 6 field.In the CLU-14 well there is a problem of loss of mud circulation at a depth of 3185ft. the CLU-14 well experienced a total loss, so that no mud returned to the surface.Based on calculations carried out at a depth of 3185 ft, the hydrostatic pressure is4357,3 psi, the fracture pressure is 4358,62 psi, the formation pressure is 2141,61psi and the ECD or Equivalent Circulation Density is 8,807 ppg, and the BottomHole Circulation Pressure or BHCP is 4156,028 psi. The cause of the loss of mudis natural fracture. The countermeasures carried out on the CLU-14 well are LCMand blind drilling. The method using LCM did not succeed in closing the loss zone,so a blind drilling method was carried out. Blind drilling is carried out to maintainthe stability of the hole by maintaining hydrostatic pressure. This method works tototal depth. Thus stopping the rate of loss of circulating drilling mud.

Bagaimana Anda menilai Koleksi ini ?