DETAIL KOLEKSI

Studi laboratorium pengaruh temperatur terhadap ketahanan sifat fisik lumpur KCL-Polimer dan lumpur minyak


Oleh : Jenry Jonathan

Info Katalog

Nomor Panggil : 1209/TP/2019

Penerbit : FTKE - Usakti

Kota Terbit : Jakarta

Tahun Terbit : 2019

Pembimbing 1 : Lilik Zabidi

Pembimbing 2 : Prayang S.

Subyek : Petroleum engineering;Polymers

Kata Kunci : mud, temperature, resistance, physical, analysis

Status Posting : Published

Status : Lengkap


File Repositori
No. Nama File Hal. Link
1. 2019_TA_TM_-071.11.197_Halaman-judul.pdf
2. 2019_TA_TM_-071.11.197_Bab-1.pdf
3. 2019_TA_TM_-071.11.197_Bab-2.pdf
4. 2019_TA_TM_-071.11.197_Bab-3.pdf
5. 2019_TA_TM_-071.11.197_Bab-4.pdf
6. 2019_TA_TM_-071.11.197_Bab-5.pdf
7. 2019_TA_TM_-071.11.197_Daftar-pustaka.pdf
8. 2019_TA_TM_071.11.197_Lampiran.pdf

P Pemboran yang harusnya berfungsi sebagai mana mestinya tetapi nyatanya tidak, ketidak sesuaian jenis additive atau tipe lumpur yang dipakai tidak sesuai dengan sifat-sifat formasi ataupun dengan operasi pemboran dan pengelolaan lumpur yang keliru dan tidak efektif.Fluida pemboran yang digunakan harus sesuai dengan kondisi tertentu. Setiap kenaikan kedalaman pemboraan, otomatis suhunya juga meningkat, maka dari itu perlu dianalisa setiap ketahanan sifat fisik lumpur yang digunakan terhadap meningkatnya temperatur, sehingga dapat diteliti bahan apa yang perlu ditambahkan atau dikurangkan agar mencapai nilai yang ideal atau yang diinginkan. Setelah itu dapat diketahui apa perubahan yang terjadi pada sifat fisik lumpur pada beberapa temperatur.Dengan peralatan yang sudah tersedia, nilai-nilai rheologi pada setiap jenis lumpur dapat diketahui dan analisis. Sehingga pada akhirnya dapat dilihat bagaimana ketahanan jenis lumpur yang diteliti terhadap beberapa temperatur, dan juga ideal atau tidaknya setiap jenis lumpur yang diteliti sesuai dengan standar spesifikasi lumpurPada Tugas Akhir ini, penulis membatasi pembahasan pada “Studi Laboratorium Pengaruh Temperatur Terhadap Ketahanan Sifat Fisik Lumpur KCl-Polimer dan Lumpur Minyak”Hasil yang ingin dicapai dari skripsi ini adalah dapat mengetahui mengenai pengaruh sifat fisik lumpur pada berbagai temperatur.

D Drilling that should function as it should but in fact not, the incompatibility of the type of additive or type of sludge used is not in accordance with the characteristics of the formation or with the drilling and mud management operations that are erroneous and ineffective. The drilling fluid used must comply with certain conditions. Each increase in drilling depth, the temperature also automatically increases, therefore it is necessary to analyze each resistance to the physical properties of sludge used to increase the temperature, so that it can be examined what materials need to be added or subtracted to achieve the ideal or desired value. After that, it can be seen what changes occur in the physical properties of sludge at several temperatures. With available equipment, rheological values for each type of mud can be identified and analyzed. So that in the end it can be seen how the resistance of the type of sludge studied to several temperatures. In this Final Project, the author limits the discussion on "Laboratory StudiesOn The Effect of Temperature On The Physical Properties Resistance of CCl-Polymer and Oil Mud" The results to be achieved from this paper are to be able to know the effect of the physical properties of mud at various temperatures.

Bagaimana Anda menilai Koleksi ini ?