DETAIL KOLEKSI

Perancangan sistem perpipaan dari sumur ke tangki penyimpanan untuk memenuhi kebutuhan air bersih Gedung Produksi Elektronik di PT X

2.5


Oleh : Twin Ade Nugraha

Info Katalog

Penerbit : FTI - Usakti

Kota Terbit : Jakarta

Tahun Terbit : 2020

Pembimbing 1 : Supriyadi

Subyek : Water purification;Piping - Testing

Kata Kunci : piping system, pipe, head installation, pump

Status Posting : Published

Status : Lengkap


File Repositori
No. Nama File Hal. Link
1. 2020_TA_STM_061001800509_Halaman-Judul.pdf
2. 2020_TA_STM_061001800509_Lembar-Pengesahan.pdf
3. 2020_TA_STM_061001800509_Bab-1_Pendahuluan.pdf
4. 2020_TA_STM_061001800509_Bab-2_Tinjauan-Pustaka.pdf
5. 2020_TA_STM_061001800509_Bab-3_Metodologi-Penelitian.pdf
6. 2020_TA_STM_061001800509_Bab-4_Analisis-dan-Pembahasan.pdf
7. 2020_TA_STM_061001800509_Bab-5_Kesimpulan.pdf
8. 2020_TA_STM_061001800509_Daftar-Pustaka.pdf
9. 2020_TA_STM_061001800509_Lampiran.pdf

L Lokasi produksi air bersih (sumur) pada PT.X saat ini mencukupi kebutuhan air bersih gedung A, B dan C. Ketiga gedung tersebut berjarak dan gedung A merupakan gedung terjauh dari lokasi produksi air bersih (gedung A merupakangedung produksi elektronik yang dimaksud). Terdapat rencana bagi gedung A akandibuatkan lokasi produksi air bersih sendiri untuk memenuhi kebutuhan air bersih penghuninya. Lokasi produksi air bersih tersebut meliputi pipa, pompa, dan tangki penyimpanan air bersih. Berdasarkan hal tersebut, dibutuhkan sistem perpipaan dari sumur menuju tangki penyimpanan air bersih.Sistem perpipaan ini dirancang sesuai kebutuhan air bersih 316 orang atau121 unit plambing yang sudah ada di gedung tersebut. Hasil yang didapatkan adalahsistem perpipaan berdasarkan standar SNI 03-7065-2005 dan SNI 8153:2015 tentang sistem plambing dengan luas lahan tersedia 10m × 9m yang menggunakanpipa PVC Ø3 inci sebagai tempat air bersih mengalir dengan debit 0,544 m3/min.Dalam hal penyimpanan air bersih menggunakan tangki bawah dan tangki atas yangmasing-masing tangki memiliki volume 45 m3 dan 9 m3. Sistem tersebutmenggunakan dua buah pompa sentrifugal dimana pompa 1 menghisap air bersih dari sumur menuju tangki bawah dengan head total instalasi 11,365m dan memiliki daya 2,2 kW. Sedangkan pompa 2 menghisap air bersih dari tangki bawah menuju tangki atas dengan head total instalasi 22,42m dan memiliki daya 5,5 kW. Estimasi biaya total unit sistem perpipaan ini sebesar Rp. 271.395.000 sedangkan biaya penggunaan kelistrikan pompa selama satu bulan sebesar Rp. 1.989.000.

T The location of water production (wells) at PT.X is currently sufficient tomeet water needs of buildings A, B, and C. The three buildings are spaced out and building A is the building furthest from the water production location. There isplanning for building A to create its own water production location to meet thewater needs for its occupants. Water production sites include pipes, pumps, and water storage tanks. Based on this, piping systems are needed to transfer water fromwells to water storage tanks.The piping system is designed according to the water needs of 316 occupants or 121 units that already exist in the building. The result obtained is a piping system based on SNI 03-7065-2005 and SNI 8153:2015 standard with available land area of 10 m × 9 m which uses PVC Ø3 pipe for 0.544 m3 / min flow.In terms of storage of water use a lower tank and upper tank, which each tank has a volume of 45 m3 and 9 m3. This system uses two centrifugal pumps where first pump deliver water from the wells to the lower tank with a total installation head of 11,365m and has a 2.2 kW power. While pump 2 deliver water from the lowertank to the upper tank with a total installation head of 22.42m and has a power of 5.5 kW. The estimated total unit cost of this piping system is Rp. 271,395,000 whilethe cost of using the pump for one month is Rp. 1,989,000.

Bagaimana Anda menilai Koleksi ini ?