DETAIL KOLEKSI

Studi laboratorium pengaruh penggunaan fluida cabr2 terhadap sifat fisik batuan sandstone sintetik


Oleh : Amry Nisfi Febrian

Info Katalog

Penerbit : FTKE - Usakti

Kota Terbit : Jakarta

Tahun Terbit : 2015

Pembimbing 1 : Sri Wahyuni

Pembimbing 2 : Listiana Satiawati

Subyek : Sandstone;Fluid complexion function

Kata Kunci : completion fluid, CaBr2, sandstone synthetic

Status Posting : Published

Status : Lengkap


File Repositori
No. Nama File Hal. Link
1. 2015_TA_TM_07110033_Halaman-judul.pdf
2. 2015_TA_TM_07110033_Bab-1.pdf
3. 2015_TA_TM_07110033_Bab-2.pdf
4. 2015_TA_TM_07110033_Bab-3.pdf
5. 2015_TA_TM_07110033_Bab-4.pdf
6. 2015_TA_TM_07110033_Bab-5.pdf
7. 2015_TA_TM_07110033_Bab-6.pdf
8. 2015_TA_TM_07110033_Daftar-pustaka.pdf
9. 2015_TA_TM_07110033_Lampiran.pdf

F Fluida komplesi adalah salah satu fluida yang digunakan untuk mengontroltekanan formasi serta meminimalisir kerusakan formasi setelah pemboran selesaidilakukan. Salah satu tujuan dari kegiatan komplesi adalah untuk dapat mengimbangitekanan didalam sumur produksi setelah proses pemboran. Pada penelitian tugas akhirini digunakan fluida komplesi CaBr2 dengan jenis sampel batuan sandstone sintetis.Sampel sandstone sintetis yang digunakan sebanyak 4 buah untuk 4 jenis SG dan pHyang berbeda yang mempunyai nilai untuk sampel 1 SG sebesar 1.4 dengan pH 8.97,sampel 2 SG sebesar 1.5 dengan pH 8.79, sampel 3 SG sebesar 1.6 dengan pH 8.59,dan sampel 4 SG sebesar 1.7 dengan pH 8.2. Pengujian yang lebih spesifik akandilakukan untuk menentukan nilai porositas dan permeabilitas pada batuan Sandstonesintetis tersebut.Hasil pengukuran porositas dari percobaan yang telah dilakukan didapat besaran orositas yang relatif sama, untuk sampel 1 porositas sebesar 19.54 %, sampel 2 porositas debesar 17.72 %, sampel 3 porositas sebesar 19.54 %, sampel 4 porositassebesar 19.2 %. Kemudian dari hasil Pengukuran sampel batuan sandstone sintetistersebut didapatkan hasil persentase nilai kenaikan permeabilitas untuk sampel 1sebesar 34.37 %, sampel 2 sebesar 36.48 %, sampel 3 sebesar 43.26 %, sampel 4sebesar 37.06 %.

C Completion fluid is one of the fluid that is used to control the formation pressureand minimize formation damage after drilling is completed. One of the goals of wellcompletion is to be able to drain the reservoir fluid into the production well. In thisfinal thesis, CaBr2 is used as completion fluid for the synthetic sandstone rock sample.There were 4 piesces of 4 different SG synthetic sandstone samples being for thisexperiment. The completion fluid value for the 1st sample SG is 1.4 with the pH of 8.9,the 2nd sample SG is 1.5 with the pH of 8.79, the 3rd sample SG is 1.6 with the pH of8.59 and the 4th sample SG is 1.7 with the pH of 8.2. More specific testing will beconducted to determine the porosity and permeability of the rock Sandstone synthetic.Porosity measurement results of trials that have been done obtained relativelythe same amount of porosity, for sample 1 porosity is 19.54 %, sample 2 porosity is17.72 %, sample 3 porosity is 19.54 %, sample 4 porosity is 19.19 %. Then the resultsgained by measuring the synthetic sandstone rock samples, the increase in permeabilityvalue for sample 1 is 34.37%, sample 2 is 36.48%, sample 3 is 43.26% and sample 4 is37.06%

Bagaimana Anda menilai Koleksi ini ?