DETAIL KOLEKSI

Analisis pressure build-up test dan uji laju alir deliverability sumur “aaa-1” lapangan aaa


Oleh : Abdurahman Azan Ali

Info Katalog

Penerbit : FTKE - Usakti

Kota Terbit : Jakarta

Tahun Terbit : 2023

Pembimbing 1 : Hari Karyadi Oetomo

Pembimbing 2 : Arinda Ristawati

Subyek : Oil well drilling

Kata Kunci : Pseudopressure, Pressure Build-UP Test, uji deliverabilitas, Isochronal test

Status Posting : In Pres

Status : Lengkap

P Pada umumnya uji tekanan yang dilakukan pada suatu sumur gas yaitu uji pressure build up dan uji deliverabilitas. Uji pressure build up dan uji deliverabilitas merupakan suatu pengujian sumur dengan memberikan gangguan kesetimbangan tekanan terhadap sumur yang diuji dengan menutup sumur tersebut,sehingga impuls perubahan tekanan akan tersebar ke seluruh reservoir sebagai fungsi waktu.Uji tekanan ini dilakukan berdasarkan kebutuhan data karakteristik suatu reservoir yang kemudian dapat dianalisa sebagai acuan untuk pengembangan suatu lapangan. Data karakteristik reservoir yang di dapatkanseperti tekanan reservoir rata-rata (P avg) dengan hasil 5255.36 psia dan 5183.27 psia, permeabilitas (K) dengan hasil 7.8 Md dan7.8 Md , skin faktor (kerusakan atau perbaikan formasi) dengan hasil 6.9 dan 6.15, penurunan tekanan akibat skin (∆Pskin) dengan hasil 550.43 psi dan 456.63 psi , radius investigasi (Ri) dengan hasil 883.5 ft dan S,E,N,W , flow efficiency (FE) dengan hasil 0,48 , serta dengan uji deliverabilitas dapat diperoleh harga absolute open flow potential (AOFP) dengan hasil n 8.73 , c 2.53E-61 , AOFP 19834.7 Mscfd dan 19791.Mscfd dari Sumur AAA1 Lapangan AAA. Oleh karena itu pada skripsi ini penulis ingin menganalisa hasil uji sumur pada sumur gas AAA1, dimana analisa tekanan yang digunakan pada sumur gas AAA1 pada lapangan AAA yaitu uji pressure build up dengan metode Horner dan Derivative Plot serta uji deliverabilitas. Kedua uji tekanan tersebut dilakukan dengan menggunakan perangkat lunak Ecrin v4.02 dan secara manual dengan Ms.Excel .

I In general, the pressure test carried out on a gas well is the pressure build up test and the deliverability test. The pressure builds up test and the deliverability test are a well test by providing a pressure balance disturbance to the tested well by closing the well, so that the pressure change impulse will be spread throughout the reservoir as a function of time. This pressure test is carried out based on the needs of data on the characteristics of a reservoir which can then be analyzed as a reference for the development of a field. Data on reservoir characteristics obtained such as average reservoir pressure (P avg) with results of 5255.36 psia and 5183.27 psia, permeability (K) with results of 7.8 Md and 7.8 Md, skin factors (damage or repair formation) with results of 6.9 and 6.15, pressure drop due to skin (∆Pskin) with results of 550.43 psi and 456.63 psi, investigation radius (Ri) with results of883.5 ft and S, E, N, W, flow efficiency (FE) with a result of 0.48, and with a deliverability test can be obtained absolute open flow potential (AOFP) price with results n 8.73, c 2.53E-61, AOFP 19834.7 Mscfd and 19791.Mscfd from AAA Field AAA1 Well. Therefore, in this thesis, the author wants to analyze the results of well tests in AAA1 gas wells, where the pressure analysis used in AAA1 gas wells in the AAA field is a pressure build up test with the Horner method and Derivative Plot and deliverability tests. Both pressure tests were performed using Ecrin v4.02 software and manually with Ms.Excel.

Bagaimana Anda menilai Koleksi ini ?